bolid S2000-K, User Manual

Page: 7 / 50

S2000-К Features and Design
7
www.bolid.com
sign does not provide usage in presence of aggressive media, dust, and also in fire-hazardous spac-
es.
The S2000-К keypad is equipped with the green backlit liquid crystal display (LCD), 1 x 16 characters
( 2 ). In the quiescent mode the display indicates current time. In the User Command Input mode the
LCD displays the dialog between the user and the network controller as well as a result of the re-
quested operations while when the keypad is used as output device the LCD displays the messages
received from the network controller.
The S2000-K keypad being in the Event Display mode, its LED indicator ( 1 ) indicates the fact of re-
ceiving a message from the network controller by steady lighting. If, in addition, the mode of indicating
alarms is set on the LED indicates raw alarms by blinking.
The buttons ( 3 ) are used to input user commands, to switch the keypad LCD into display modes (see
above), to browse event log records, and to clear alarm messages.
The S2000-К has a built-in beeper for indicating pressing the buttons and the results of performed
operations. In the alarm indication mode the beeper produces differentiated beeps depending on the
message content.
The non-volatile memory is intended to store the network address of the keypad, the keypad configu-
ration parameters, the keypad event buffer, and the system message log.
1
2
3