bolid S2000-K, User Manual

Page: 42 / 50

Orion ISS
www.bolid.com
42
TROUBLESHOOTING
s
After the S2000-K is turned on, its
display shows nothing
Make sure that power is applied to the power terminals of
the S2000-К
Check whether the keypad is properly connected to the
network controller via the RS-485 interface
s
S2000-K
displays ‘NO RS485 LINE’,
with LED flashing once per second
Make sure the А and В wires of the RS-485 bus are properly
connected to the А and В keypad terminal block. Reverse
their positions if necessary
s
No messages are displayed by the
keypad LCD
and/or
s
Keypad sounder is silent when the
keypad receives alarm messages,
although pressing keypad keys
cause the S2000-K to sound
The options of keypad’s displaying system events and indi-
cating alarms are disabled by default. To program these
options, examine the settings of the S2000-K and the net-
work controller being in use. For more about this, see Sec-
tion Programming of this Manual.
1. Connecting the S2000-K to a computer with the run
UProg Configuration Tool, make sure the Display
Events option and Indicate Alarms Options are acti-
vated for the keypad. Note, that indicating alarms can
be enabled only if displaying events is enabled.
2. Running the PProg Programming Tool or Orion Soft-
ware tools, make sure that:
-
the S2000-K is enrolled in the list of devices con-
nected to the network controller, and
-
the S2000-К is specified as the device the controller
translates events to, and
-
the network controller is programmed to translate the
specified kinds of events occurred in the specified par-
titions to the S2000-K..
s
The time displayed by the S2000-K
differs from that displayed by the
S2000/S2000M console
Such a situation can happen in case of the console pow-
er’s being off for some time.
To fix the problem, set the correct time of the
S2000/S2000M manually. After that, the console will au-
tomatically synchronize all the devices connected via the
RS-485 interface.