bolid S2000-K, User Manual

Page: 33 / 50

S2000-К Programming
33
www.bolid.com
control command. The procedures of programming user rights are common and out of the scope of
this Manual.
If the S2000-K is used for authorized access requests, each user should be assigned to an access
code for passages through the specific doors. An access code can be used both for access control
and arming/disarming the S2000-K.
Keypad rights are defined by specifying in the controller database the list of partitions which can be
managed using the S2000-K. There are two ways for users to be authorized by the system to enter
partition control commands using the S2000-K. The first way is to enter a digital PIN code directly
from the S2000-K keypad. The second way is to present an electronic access device (iButton or Prox-
imity card) to a reader connected to another device in the same RS-485 bus (such as S2000-4,
S2000-2, S2000-KDL, etc.) and then operate the S2000-K to control available partitions. The last
combined mechanism provides both enhanced security due to using electronic access devices and
flexible and versatile control enabling users to select partitions and actions individually via a menu
and to track system responses on the keypad LCD.
For the PProg, the keypad rights are programmed using the Device Rights tab (see Figure 5). The
upper window will contain the list of devices enrolled in the console database, the bottom window dis-
playing the list of system partitions.
Figure 5