21
c)
The LEDs “1” – “60” turn on with amber and at the same time the indicators , FIRE 2,
FIRE, PREALARM, INTRUSION, PANIC ALARM, ARMING FAILED, FAULT, DISABLED, and
the reader LED turn on;
d)
The LEDs “1” – “60” turn on with red and at the same time the indicators
, FIRE,
PREALARM, INTRUSION, PANIC ALARM, and the reader LED turn on with red;
e)
The LEDs “1” – “60”, , FIRE 2, and the reader LED turn on in green;
f)
The test completes.
The self-diagnostic mode switches off after a press on
or automatically when the test has
completed.
3.5
Technical Examination
Technical examination is not applicable for this equipment.
3.6
Preservation (Depreservation, Represervation)
Preservation is not applicable for this equipment.
4
Repair
Repair of faulty equipment is to be performed by the manufacturer or in authorized repair centers.
The equipment shall be sent for repair in compliance with Company Standard QMS 8.5.3-2015, which
can be found online at our website
https://bolid.ru/support/remont/
.
A product’s failure resulted from consumer’s not observing rules of mounting and operation is
not a reason for claims and warranty repair.
Claims should be submitted to the following address:
NVP BOLID, #4 Pionerskaya Str., Korolyov, Moscow Region, 141070, Russia
Phone/fax: +7 (495) 775-71-55 (PBX). E-mail:
.
In case of any issue related to use of the product, please contact the technical support: +7 (495)
775-71-55 or e-mail:
.
5
Storage
The module in the consumer package shall be stored as per Storage Conditions 1 in line with
GOST 15150-69.
In the premises where the module is stored, there shall be no vapors of acids, alkalis, aggressive
gases, and other harmful substances which result in corrosion.
6
Transporting
Transporting the module is admitted in a transport package at ambient temperatures -50 through
+50
°
С
and relative humidity up to 95 % at +35
°
С
.
If transported under negative ambient temperatures or high air humidity, then before installing
the modules shall be kept unpacked for at least 24 hours in a room with normal climatic conditions.
7
Disposal
The module is to be disposed of considering that there are no toxic components in it.
Attention!
The equipment shall be submitted for repair being assembled and clean and along with
all the parts listed in the documentation.
Claims are accepted only if a reclamation report describing the problem is applied to the
submitted equipment.
