5.3.1 Examples of DIP Switch Settings
1
O
N
Example 1: one LED signal
(uses connections S1, B1, B2)
- operational mode 1 – one signal, braking in one direction
- signal has LEDs, the voltage of the red LED is connected to S1.
- braking starts in the first section (B1)
2
3
Variant of example 1: If braking shall start at the second section (B2), then switch 2 is Off.
1
O
N
Example 2: one signal with internal contact
(uses connections S1, B1, B2)
- operational mode 1 – one signal, braking in one direction
- signal has an internal switch, a switched voltage is connected to S1.
- braking starts in the first section (B1)
2
3
Variant of example 2: If braking shall start at the second section (B2), then switch 2 is Off.
1
O
N
Example 3: two LED signals
(uses connections S1, S3; B2, B1, B3)
- operational mode 2 – two signals, braking in two directions
- signals have LEDs, the voltage of the red LED is connected to S1 or S3 resp.
- braking only in the last section (B2 or B3 resp.)
2
3
Annotation to example 3: Instead of three track section in sequence B2–B1–B3, also the variant
with two sections B2–B3 can be used.
1
O
N
Example 4: two signal with internal contacts
(uses connections S1, S3, B2, B1, B3)
- operational mode 2 – two signals, braking in two directions
- signals have an internal switch, a switched voltage is connected to S1 or S3.
- braking only in the last section (B2 or B3 resp.)
2
3
Annotation to example 4: Instead of three track section in sequence B2–B1–B3, also the variant
with two sections B2–B3 can be used.
5.4 Connections
All external connections of the brake module are labelled on the board and explained in the table
below:
Label
Function
0
digital track voltage
center stud track: B is the red wire to the center studs, 0 is the brown wire to the rails
ground.
two-rail track: B is the wire to rail on the right hand side (only this right rail is divided
into track sections), 0 is the wire to the continuous rail on the left hand side. Note:
the color code or polarity of the electrical track connection is irrelevant, essential is
right and left rail as seen when approaching the signal.
B
bogobit Bremsmodul Oneway · 2011-12-29
page 6 / 11
