1 Introduction
Please read the instructions completely before using the product. Observe all operating and safety
instructions!
The names of companies and products are trademarks of the respective owners. All rights re-
served.
2 Intended Use
The Bogobit Bremsmodul Oneway is a brake module for digitally controlled model railways. The
module generates a “brake voltage” that is applied to the track depending on the aspect of a sig-
nal. This lets locos brake smoothly if they are equipped with a suitable decoder. It can be used on
model layouts with center stud tracks (Märklin H0), and for certain applications also with two-rail
tracks. It can be used on digitally control model railways using the Märklin/Motorola/mfx protocol
and, depending on decoder characterstics, also with the DCC protocol.
This product is no toy. It is not suitable for children up to 14 years of age.
Any use other than that described before is not permitted.
The product may not be modified or reassembled.
3 Safety Instructions
3.1 General
In case of damage incurred by disregarding these operating instructions, the warranty claim is void.
Liability for any and all consequential damage is excluded!
We do not assume any liability for damage to property or personal injury caused by improper use
or the failure to observe the safety instructions! The warranty is voided in these cases.
•
For safety and licensing reasons (CE), it is not permitted to change or modify the product.
Only use original or equivalent replacement parts for repair.
•
Ensure that all electrical connections and connection cables conform to the regulations and
comply with the operating instructions.
•
Upon sudden change of climatic conditions (e. g. transfer from a cold place to a warm
room) water may condense on the device, which may lead to damage. Allow approx.
2 hours to acclimate before powering on the device.
•
Do not operate the device near easily inflammable objects, liquids or gases. Danger of ex-
plosion!
•
Do not expose the device to high temperatures, strong vibrations, high humidity or chemic-
ally aggressive environment.
•
Operate the device only in dry indoor rooms (below 80 % humidity, non condensing) and at
normal room temperature (0 °C to 40 °C).
•
Do not operate the device unattended.
bogobit Bremsmodul Oneway · 2011-12-29
page 2 / 11
