31
To adjust the router settings:
Step 1
On the appliance Web UI’s main page, select
DSP
.
Step 2
Select the
Menu
button for the channel or select the
Menu
button for the
Output
.
Step 3
From the drop-down menu, select
Router
.
Step 4
Adjust the input, output, and cross gain settings as
desired.
Step 5
To route a signal to a specific output, select the Input's
Enable button so that it changes from gray to green.
This signal can be sent to Network 1, 2, 3 or 4 or to the
Analog for the Line Output or Speaker Out, or to all.
Network outputs are signals that are sent over the
Figure 16, Router Settings
Note:
If you want to return to the factory settings, select the
Reset
icon that appears in the right corner.
