27
6.11
Adjusting Noise Gate Settings
A noise gate controls the volume of an audio signal by attenuating by
a fixed amount the signals that register below the threshold.
To adjust the noise gate settings for a channel:
Step 1
On the appliance Web UI’s main page, select
DSP
.
Step 2
Select the
Menu
button for the channel.
Decay
Sets the rate for turn off of the limiter after
the signal is below the threshold. Decay
range is 5 to 2300 milliseconds.
RMSTC
Sets how fast the limiter reacts to the above
threshold signal. RMSTC range is 50 to
10000.
Figure 14, Noise Gate Settings
Table 10, Limiter Settings (Continued)
