17
To adjust the channel volume level:
Step 1
On the appliance Web UI’s main page, select
DSP
.
Step 2
Use the slider for the channel’s
Level
row to adjust the
level.
6.5
Selecting Input Type, Mic Gain, and
Phantom Power
Just above the labels for the input channels is a slider that allows you
to select either
Line
or
Mic
as the input.
If you select
Mic
as the input, you can adjust the
Mic Gain
dial and
select if the microphone will use phantom power. Phantom power is
electrical power that is sent to a condenser mic through its mic cable.
The cable must have XLR connectors to pass phantom power.
6.6
Adjusting Compression Settings
A compressor slightly reduces the dynamic range of a signal. This
effect is perceived to quiet loud sounds and boost quiet sounds. A
compressor smooths transients. Compressor parameters are set per
channel. The Compressor dialog box has LEDs for the input and
output signals.
