Bogen Communications
50 Spring Street
Ramsey, NJ 07446
201.934.8500 P.
201.934.9832 F.
www.bogen.com
Before You Get Started
Basic Information
Definitions
Event
A pre-programmed action, such as ringing of bells at a specific time, which is triggered by a relay closure in one or more of the zones of
the master clock. Each event is assigned a schedule number.
Schedule
A series of programmed events. An example of a schedule would be a typical school day.
Zone
Each zone is controlled by a relay closure which devices such as bells can be connected.
User programming features
All 3000 series user programming is to be done by using the 16-button keypad located on the front of the Bogen master clock. The keypad is
shown below:
The LCD display is 20 characters wide and consists of both a top and a bottom line. When the master is powered on, the LCD display should read:
Accessing Features from the LCD Display
To enter the user programming mode, you will need to use the four digit user password. The default password is 1111. This may or may not be
changed by the installing technician. Type in the four digit password on the keyboard. There is no need to press the YES/ENTER key after entering
the password because the master clock will go straight to user programming upon verification of the password. Please note: your password will be
hidden as you enter it. The * sign will appear instead of digits.
To Exit the Programming Mode from the LCD Display
If at any time during programming, you wish to exit programming mode, press the YES/ENTER key or the NO/CANCEL key, as appropriate, in
response to the prompts on the LCD display. After scrolling through all the options and responding to all applicable prompts, the LCD display will
then return to the main screen. There is a 20 second timeout if no buttons are pressed.
