Installation
The FumeCab 700 has been designed to remove and filter
fume containing potentially hazardous particulate and
gases generated during manufacturing processes. Such
hazardous substances are captured within a multistage
filtration system after which the cleaned air is returned to
the workplace.
The FumeCab 700 captures the fume acting as an enclosure
or cabinet. The user is working on the work piece from
inside the unit instead of externally through the use of
ductwork.
Specification
Dimensions: Height 780mm Depth 490mm Width 690mm
Weight: 70Kg
Voltage: 115V
Frequency: 60Hz
Full load current: 3A
Power: 320w
Face Velocity: 0.4 M/Sec
Connection to Power Supply
Please follow the above specification when selecting the
power supply outlet for the extraction system, ensure the
power supply is suitable before connecting the extraction
unit.
Check the Integrity of the electrical power cable, if the
supply cord is damaged the extraction unit should not be
connected to the mains. The supply cord should only be
replaced by a BOFA engineer as an electrical safety test may
be required after replacement.
The extraction unit
MUST
be connected to a
properly earthed outlet.
Connect the power cable to an isolated electrical supply.
The mains socket should be installed near the extractor it
should be easily accessible and able to be switched On/ Off.
The cable run should be arranged so as not to create a trip
hazard.
Optional Stand
A powder coated mild steel stand/trolley is available as an
optional extra for the FumeCab 700. The stand allows easy
transportation on four castors at an ideal working height.
ESD Compliant FumeCAB 700
An ESD compliant version of the FumeCAB 700 is also
available. This unit features an internal anti-static mat with
lead termination points. The unit is also painted in an ESD
compliant paint finish.
FumeCAB 700 Conformal Coating
A conformal coating upgrade is available as an optional
extra for the FumeCAB 700 unit. This involves the
installation of dark coloured magnetic screens and a UV
light inside the working area within the unit to make the
conformal coating application process easier.
Anti-static mat
ESD Paint Finish
4
01
