-7-
STEP 04
1. PLACE 50MM SQUARE CAP (41) INTO BOTH E NDS OF LEG
EXTENSION /ARM CURL BAR (14).
2. ATTACH SEAT SUPPORT (13) TO VERTICAL BEAM (10), W ITH
M10*75MM BOLT (50), M10 NYLON NUT (63), AND M10 W ASHERS (68).
3. ATTACH SEAT ASSEMBLY UNIT (11) TO SEAT SUPPORT (13) AS SHOWN.
4. ATTACH LEG EXTENSION /ARM CURL BAR (14) TO SEAT ASSEMBLY (13).
5. ATTACH BACK SEAT (20) TO VERTICLE BEAM (10) AS SHOW N.
6. ATTACH SEAT (19) TO SEAT ASSEMBLY (13) AS SHOW N.
7. SLIDE PAD HOLDERS (32) INTO THE HOLE PROVIDED.
8. SLIDE LEG EXTENSION/CURL PADS (29) ONTO PAD HOLDERS (32).
9. PLACE 1" ROUND CAP (40) INTO PAD HOLDERS (32).
