-5-
STEP 02
1. ATTACH THE RUBBER DONUT (09) O NTO THE GUIDE ROD (02).
2. SLIDE THE W EIGHT PLATE (0 8) AND TOP PLATE (06) OVER THE
GUIDE ROD (02).
GROOVE FOR SELECTOR PIN ON WEIGHT PLATES SHOULD FACE DOWN
3.
INSTALL 1” ROUND BUSHING (38) INTO THE SELECTOR SHAFT (05)
W ITH PIN (47) THEN ATTACH THE SELECTOR SHAFT (05)
ONTO THE TOP PLATE (06) .
4. PLACE 50MM SQUARE CAP (41) ONTO BOTH ENDS OF FRONT BASE
(01).
5. PLACE RUBBER CAP (70) O NTO BOTH ENDS OF RIGHT BASE (04).
6. ATTACH RIGHT BASE (04) TO MAIN BASE (01) AS SHOW N.
