-6-
STEP 03
1. PLACE 50MM SQUARE CAP (41) ONTO BOTH ENDS OF THE TOP
CROSS BEAM (12).
2. ATTACH TOP CROSS BEAM (12) ONTO THE VERT ICAL BEAM (10)
FROM TOP SIDE AND CONNECT THE GUIDE RODS (02) TO THE TOP
CROSS BEAM (12) AS SHOW N.
3. ATTACH RUBBER BUMPER (37) TO THE VERTICAL BEAM (10).
4. ATTACH PULLEY BLOCK (21) TO THE VERTICAL BEAM (10), USE
M8*65MM BOLT (57) W ITH M8 W ASHER (6 9) AND M8 NUTS (6 4).
5. INSTALL PRESS PIN (18) TO THE VERTICAL BEAM (10) W ITH
M8*65MM BOLT (57), M8 W ASHER (69) AND M8 NUTS (64).
