5.
After pressing MODE to confirm the set of TIME, DIST or CAL, if
you want to cancel the function setting and to select other
functions, just press MODE to exit.
Time setting range: 65%/75%/85% 0，5~99 minutes，preset 0，
step is 1.
IND 0，5~99 minutes，preset 0，step is 1.
Distance setting range: 0~999，preset 0，step is 1
Calories setting range: 0~999，preset 0，step is 1.
6.
Under HRC control mode, if users do not set TIME, DIS or CAL,
directly press START, and the treadmill will start at the speed
of 1 KPH, the incline of 0. When operating, the program will change
the speed and incline angle according to users＇ pulse value.
7.
After perform HRC program, if any pulse is not detected in 30
seconds, the program will automatically shift to start/ready
status.
8.
Under PROGRAM RUN END or STOP status, if STOP is not pressed after
4 minutes, the screen will automatically shift to start/ready menu.
9.
PULSE function: It will start to detect the message under sport
mode, the calculation range is 40～220. The hand pulse and wireless
pulse are both adopted and the wireless pulse is first.
●
After entering into the mode function, the matrix window will display
the preset program and the preset
Level(L1) will display above the
picture.
This function is to select exercise intensity(
L1~L10)
. You
can press
to change the level you need and press ENTER to
confirm.
●
After level is selected,
TIME w
indow will start to flash. At this time,
press
to set the sport time you need. Or press
Quick / START
directly to start with no countdown.
**Time range：20~99 min，preset value: 30min，step is 1 min.
Error Signal Display：
E1：
The treadmill can’t read the speed value.
E6：
In the range of ADC, incline motor doesn’t run.
E7：
Incline is too high or too low(exceed the range).
** If it has any error signal, please connect with the sale agent.
