background image

 

2.

 

During working, the beeper will make a sound for warning if the safety key 
works off, then the treadmill will stop working. At this moment, put the safety 
key back to the recess of console, and all the values will turn back to the initial 
values.

 

3.

 

If you don’t hold the Hand Pulse Sensor in general Start/Ready position, the 

PULSE

 window will display HP. You will see the Pulse window display the heart 

pulse rates when you hold the Heart Pulse Sensors on the handrails.

 

II.

 

Operation Instruction: 

1.

 

Under Start/Ready position, you can press Mode directly to enter the 
program edit.

 

2.

 

Under Start/Ready position, press 

Quick  /  Start

 to enter directly by 

pressing Manu run.

 

Press START Dot Matrix to display and after counting down for 3 seconds (3 

Æ

 2 

Æ

 1), turn on the machine.

 

** When the SAFETY KEY is taken off and then replaced, it will not make reposition 

action wherever it is. You need to press start key to perform the incline to reposit 

it. 

** When power on, it will not make reposition action wherever it is. You need to 

press start key to perform the incline to reposit it. 

** Under start/ready status, hold stop key for 5 seconds, it will make reposition action 

wherever it is. 

** During performing any program, if press stop key, the program will stop. If users 

want to continue to perform the program, press start key or again press stop key to 
leave the program and back to start/ready status 

III.

 

Edit Mode: 

1.

 

Under Start/Ready position, press 

Program 

 

 to select Program 

mode. 

2.

 

Program mode

When editing, if directly press

 Quick / Start to start and   

for those unedited parts, the system 

will adopt the preset values. When 

editing, INCLINE and SPEED windows will all display first values and the 
matrix window will display the corresponding picture.

 

3.

 

WARM UP and COOL DOWN function: Under WARM UP or Program 
status, change speed or inclination, and the value will increase or decrease in 
the next level. COOL DOWN is not affected and STOP is the only function 
which can be carried out.

 

4.

 

PROGRAM has 32 levels in all. 

The first three are

 WARM UP,

the last three   

are

 COOL DOWN. 

Everyone lasts for 3 minutes. The setting time except the six 

Summary of Contents for JX540
































Reviews: