background image

2. IMPORTANT SAFETY INSTRUCTION 

When using this product, basic precautions should always be followed, including the 

following: 

Please read the instruction carefully before starting to use this product.   

Danger

 

– To reduce the risk of electric shock

 

1.

 

Always unplug this product from the electrical outlet immediately after using 
and before cleaning the treadmill. 

Warning – 

To reduce the risk of burn, fire, electric shock, or physical injury

 

1.

 

The product should never be left unattended while plugged in. Unplug the 
product from the outlet before taking on or off the clothes and other belongings. 

2.

 

To avoid any danger, close supervision is necessary when this product is used by 
children, invalids, or disabled persons. So it is when the machine is working with 
such persons around. 

3.

 

Be sure to use the product only for its intended use as described in this manual. 
Do not use any attachment not recommended by the manufacturer in order to 
avoid any danger or accidents. 

4.

 

Never operate the product if it has a damaged cord or plug, is not working 
properly, damaged, or dropped into water. Please return the product to the service 
center of seller for examination and repair. 

5.

 

Do not carry this product by the power cord or use the cord as a handle.   

6.

 

Keep the cord away from hot surfaces or ground.   

7.

 

Never operate the product with the air vents on the treadmill blocked. Keep the 
air vents free of lint, hair, etc. 

8.

 

Never drop or insert any objects into any went of the treadmill.   

9.

 

Do not use or operate outdoors. 

10.

 

Do not operate where aerosol (spray) products are being used or where oxygen is 
thin. 

11.

 

Before turning the product off, turn all switches to the off position then remove 
the plug from the outlet.   

12.

 

Connect the product to a properly grounded outlet only. 

13.

 

This machine is intended for household use only. 

14.

 

If the power cord is damaged, be sure to ask the manufacturer for replacement to 
avoid accidents.   

Summary of Contents for JX540
































Reviews: