-10-
Assembly Instruction
FIGURE 6
Step 1:
With Pivot Tubes on rear side of Handlebars (35& 36) and Connecting Arms (38&39) to
inside, slide one Large Washer (75) and Handlebars(35 & 36) onto Axle as showed.
Step 2:
Slide M17 Washer (58) onto end of Axle and carefully tap Push nut (47) onto end of Axle
with hammer.
Step 3:
Connect the Hand Pulse Extension Wire(51) out from the both side of Console Tube(2)
to Hand Pulse Wire(4) sit on the Handlebars.
FIGURE 6
