-6-
Assembly Instruction
FIGURE 2
Step 1:
Slide Pedal Bushing (54) onto shafts of Pedals (40&41) as showed as diagram. Then
thread Shafts of Pedals (40&41) into Crank (10) until tight ,then back off 1/2 turn.
Step 2:
Thread Pedal Locknut(42) onto end of Shaft. Hold Shaft with (additional wrench) and
tighten Pedal Locknut(42) with other wrench until tight.
Note: Pedal Bushing (54) MUST be able to spin freely after tightening.
FIGURE 2
