7
2. Seat Post, Seat Post Cover, Seat Cushion, and Seat Sliding Tube Installation
Slide the Seat Post Cover (32) onto the tube of the Main Frame (27). Insert the Seat Post
into the Seat Post Bushing (31) on the tube of the Main Frame (27) and then attach the
Seat Post Knob (30) onto the tube of the Main Frame (27) by turning it in a clockwise
direction with Multi Hex Tool provided to lock the Seat Post in the suitable position.
Remove three big Washer
Ф
8 (41) and three nylon Nut M8 (49) from underside of
the Seat Cushion (47). Remove nylon nuts and washers with the Multi Hex Tool with
Phillips Screwdriver provided. Guide bolts on underside of the Seat Cushion (47) through
holes on top of the Seat Sliding Tube (48), attach with three big Washer
Ф
8*
Ф
20*2.0 (41)
and three nylon Nut M8 (49). Tighten nylon nuts and washers with the Multi Hex Tool with
Phillips Screwdriver provided.
Guide the Seat Sliding Tube Bolt on underside of the Seat Sliding Tube (48) through hole on
top of the Seat Post (
52
), attach with one Washer
Ф
8
(53)
and Seat
Screw nut M10
（
54
）
Summary of Contents for MAGNECTIC BIKE
Page 3: ...2 OVERVIEW DRAWING...
