BodyTech Fitness MAGNECTIC BIKE, Owner'S Manual

Page: 12 / 15

11
COMPUTER INSTRUCTION MANUAL
FUNCTIONAL BUTTONS:
MODE - Push down for selecting functions.
SET - To set the values of time
、
distance
、
calories and pulse when not in scan mode.
RESET - Push down for resetting time
、
distance and calories.
FUNCTION AND OPERATIONS:
1.SCAN: Press
“
MODE
”
button until
“
SCAN
”
appears, monitor will rotate through all the 5
functions: Time
、
speed
、
distance
、
calorie ODO and pulse. Each display will be hold 4
seconds.
2.TIME: (1) Count the total time from exercise start to end. (2) Press
“
MODE
”
button until
“
TIME
”
appears, press
“
SET
”
button to set exercise time. When the
“
set
”
is zero, the
computer will alarm 15 seconds.
3.SPEED: Display current speed.
4.DIST: (1) Count the distance from exercise start to end.
(2) Press
“
MODE
”
button until
“
DIST
”
appears. Press
“
SET
”
button to set exercise distance.
When the
“
set
”
is zero, the computer will alarm 15 seconds.
5.CALORIES: (1) Count the total calories from exercise start to end.
(2) Press
“
MODE
”
button unit
“
CAL
”
appears. Press
“
SET
”
button to set
exercise calories. When the
“
set
”
is zero, the computer will alarm 15 seconds.
6. ODO
：
Monitor will display the total accumulated distance.
7. PULSE: Press MODE button until
“
PULSE
”
appears. Before measuring your pulse rate, please
place your palms of your hands on Both of your contact pads and the monitor will show your
current heart beat rate in beats per minute(BPM) on the LCD after 6~7 seconds. Remark:
During the process of pulse measurement, because of the contact jamming, the measurement
value may be higher than the virtual pulse rate during the first 2~3 seconds, then will return
to normal level. The measurement value can not be regarded as the basis of medical
treatment.
NOTE
：
1. If the display is faint or shows no figures ,please replace the batteries.
2. The monitor will automatically shut off if there is no signal received after 4 minutes .
3. The monitor will be auto-powered on when starting to exercise push button w/signal in.
4. The monitor will automatically start calculating when you start to exercise and
will stop calculating when you stop exercising for 4 seconds .