14
Owner’s Manual
SPEED ADJUSTMENTS
There are two ways to adjust speed during workout. FAST and SLOW will adjust speed
by increments of 0.1Km/H or you may hold the button to ramp up or down. If the speed
adjustment increment is large, it is easier to use the direct speed buttons, which function
as direct speed control buttons during the workout. There are three direct speed buttons,
WALK (4 km/H), JOG (8Km/H), RUN (12Km/H)
ELEVATION ADJUSTMENTS
For safety reasons, elevation is designed to be manually adjusted only. At no time will the
treadmill automatically adjust elevation except during one of the following three programs:
elevation program, METS program, HRC control program.
Elevation may be adjusted even while the running belt is not moving. However, during
the program setup mode, elevation will not be adjustable.
There are two ways to adjust elevation during workout by using the UP and DOWN on
the console or the direct elevation buttons on the console
PULSE FUNCTION
This treadmill (T561 only) features wireless heart rate monitoring, the most advanced
technology to date for accurate monitoring of your heartbeat. For convenience, this
treadmill is also designed to pick up heart rate info via the contact sensors located on the
horizontal handlebar. Treadmill will look for wireless pulse signal first. If no wireless pulse
signal is present, then treadmill will look for the signal from contact sensors.
STOP – press twice to stop
UP – elevation up
DOWN – elevation down
FAST – increase speed
SLOW – decrease speed
START / ENTER
BUZZER ON/OFF
