Owner’s Manual
15
To use the wireless pulse monitoring system, you must wear the heart rate transmitter
chest strap. Place the contact surface next to your skin directly under your heart to pick
up the pulse signals from your heart. The heart rate transmitter strap is an optional
purchase and not included with this treadmill.
To use the contact heart rate, place your hands gently but firmly around the contact
sensors on the handlebars. Movements in the hands may cause difficulty for the treadmill
to pick up the signal properly. When signal is picked up, the LED light next to the pulse
display window will light up and flash to the rate of your heart beat.
Please note that some fibers used in clothing (e.g. polyester, polyamide) create static
electricity which may prevent reliable heart rate measurement. Also, note that mobile
phones, television and other electrical appliances form an electro-magnetic field around
them, which may also cause problems in heart rate measurement. Especially, increasing
the volume of your MP3/CD Player, which is plugged in treadmill console
,
can make
interference. Therefore, when using HRC program to measure the heartbeat, we
recommend you put on chest strap and adjust volume of your MP3/CD Player to medium
level.
PAUSE FUNCTION
When STOP button is pressed during workout, program is suspended. The LCD will
display “PAUSE”. After the running belt has come to a complete stop, the LCD display
window will count down from 3:00. During pause mode, only START and STOP buttons
will function.
If START is pressed within three minutes during the pause mode, the treadmill will bring
the running belt movement back to the speed at which the treadmill was before paused.
Workout values will resume counting and continue where they left off.
If STOP is pressed during the pause mode, the program will end. After three minutes if
no button is pressed, the treadmill will automatically end the workout program.
END OF WORKOUT STATS
When you have completed your workout or if you have stopped your workout, the LCD
window will display twice the following stats: total time, total distance, total calories. Then
the display will go to idle mode, ready for the next workout setup. If you wish to skip the
workout stats report, simply press the STOP button, which will skip the display to the idle
mode.
