Owner’s Manual
9
2. ASSEMBLE THE CONSOLE
Use hex wrench to perform this assembly procedure.
1. Secure console (I) to the upright post (F, G) through the upright ring(H) with six M8x15
bolts (C) and two star washers (B) and four curve washers (D). Be careful not to pinch
or damage the cables.
2. Tighten all bolts as tightly as possible.
3. Do not pull on the cable L. Carefully connect the cables (L) and (K). Push down the
cables so that they lay inside the plastic.
4. Tighten the side handlebars(J) to console (I) with four M8x15 mm
dome screws(E),
