![background image](http://html.mh-extra.com/html/body-solid/swt1000/swt1000_assembly-instructions-and-owners-manual_2783091010.webp)
10
S T E P
1
Be careful to assemble all components
in the sequence they are presented.
NOTE:
Finger tighten all hardware in this step. DO NOT wrench tighten unless instructed.
Some components may be pre-assembled. Nylon lock nuts will not fully screw onto
bolts, they must be wrench tighten to fully go on.
1A.
Attach two Lower Cross Frames
(C)
to Lower Center Cross
Frame
(B)
using:
2 - (#1) M10x125mm Hex Head Bolt
4 - (#5) M10 Flat Washer
2 - (#8) M10 Nylon Lock Nut
1A.
Attach Uprights
(A)
to Cross Frames
(C & B)
using:
8 - (#3) M10x70mm Button Head Cap Screw
8 - (#5) M10 Flat Washer
8 - (#8) M10 Nylon Lock Nut
8 - (#6) Large Flat Washer ID11xOD28mm
Summary of Contents for SWT1000
