Body Solid GDCC210.1, Assembly Instructions & Owner'S Manual

Page: 30 / 60

W a r n i n g , S a f e t y & M a i n t e n a n c e
30
Precision craftsmanship assures Body-Solid’s ability to
consistently deliver products of the highest standards. Our
products have been carefully designed to ensure safe, ef-
ficient long term operation.
However, it must be realized that safe use of this equip-
ment requires that owners carefully read and follow the
Body-Solid use recommendations, warnings, and mainte-
nance guidelines in this Owners Manual.
Routine inspection and maintenance is of critical impor-
tance to ensure maximum safety and performance. Body-
Solid uses the highest quality materials available, but wear
is inevitable. Therefore, you must carefully inspect your
equipment as outlined in the Maintenance Schedule.
Be advised that dangerous conditions can arise even dur-
ing a warranty period. A warranty does not negate the
owner’s responsibility to thoroughly, carefully and daily
inspect the machine.
Including maintaining the equipment, the owner’s respon-
sibility is also to:
m
Be sure to always provide adequate supervision to
all end-users.
m
Be sure to instruct all end-users of proper usage.
m
Be sure all supervisors and personal trainers who
instruct end-users on equipment use are properly
trained and know the function and importance of
every adjustment and setting.
Also, be sure these trainers provide proper
instruction to end-users on the fundamentals of
strength training.
CABLES:
m
While the machine is not in use, carefully run your
fingers along the cable to feel for thinning or bulging
areas. Replace cables immediately at the first sign of
damage or wear. Do not use equipment until
damaged cable has been replaced.
m
Visually inspect the cables for fraying, cracking,
peeling or discoloration.
m
Check slack in cables and re-adjust cable tension if
needed.
m
Check that the jam nut on the selector rod top bolt is
tight.
UPHOLSTERY:
m
Wipe down after every workout.
m
Periodically take the time to use a mild soap or a
mild vinyl upholstery cleaner. Avoid using any
abrasive cleaner not intended for use on vinyl.
m
Keep sharp or pointed objects out of your pockets
and clear of all upholstery.
NUTS/BOLTS/FASTENERS:
m
Periodically inspect all nuts and bolts. Tighten if
needed. If bolts seem to loosen periodically, use
Loctite 242 for a long-term cure.
m
Go through a re-tightening sequence periodically to
ensure that all hardware is properly tensioned.
GUIDE RODS:
m
Wipe clean with a dust free rag. Lubricate with a
Silicon or Teflon based lubricant.
ADJUSTMENTS / LOCKING PINS /
TIGHTENING KNOBS:
m
Check all pieces for signs of visible wear or damage.
m
Check springs in Snap Links and Pop Pins for proper
tension and alignment.
m
If the spring sticks or has lost its rigidity, replace it
immediately.
ANTI-SKID SURFACES:
m
Replace if they appear worn or become slippery.
WARNING INSTRUCTION LABELS:
m
Inspect and familiarize yourself with all safety
warnings and other user information on decals.