ASSEMBLY- STEP 9
The following Parts and Hardware will be needed to complete Step 8
Parts Description
Qty Part Part
Description
1 A4
3/8
"
x2
½
"
hex head bolt
1 B2
3/8
"
nylon lock nut
2 C1
3/8
"
I.D. washer
1
D20
Chest press cable 1440mm
Step by Step
1. Attach (D20) - Chest Press Cable to (C) - Angled Support Pillar
2. Route cable through pulley mounted on (E) - Bench Press Frame down through
pulley mounted on (A) - Main Base Frame and connect to hook on (M) - Single Pulley
Hook as shown
Page 23
EXM-1500G ASSEMBLY INSTRUCTIONS
EXM1500G-112003