ASSEMBLY- STEP 5
**Note
：
Do Not fully tighten frame bolts and nuts until after completing Step 5
**Note
：
Do Not fully tighten pulley bolts and nuts until after cable routing
The following Parts and Hardware will be needed to complete Step 5
Parts Description
Hardware Description
Qty Part Part
Description Qty
Part Part
Description
1 G
Leg
Frame
2 A7
5/16
"
×
2
¾
"
hex head bolt
1 H
Seat
Frame
2 A8
5/16
"
×
1
½
"
hex head bolt
2
R
Foam Roller Bar
1
A14
1/2”X3 3/4 hex head bolt
1 W
Seat
Pad
1 B1
1/2
"
nylon lock nut
1 X
Back
Pad
4 C2
5/16
"
I.D. washer
4
C3
5/16
"
spring washer
2
C4
1/2
"
round end cap washer
2
D1
2
"
×
2
"
×
1.8t round end cap
2
D4
1”x2” round end cap
1
D5
1
¾
"
×
1
¾
"
end cap
4
D6
phi 1
"
chrome end cap
4
D16
phi
3
½
"
×
8
"
foam roller
2
D19
1/2
"
bolt cap
6
D25
phi 3
"
nylon washer
Step by Step
1. Attach (X) - Back Pad to (C) - Angled Support Pillar (note
：
Do not overtighten pad
bolts, overtightening will strip the t-nuts pressed into the wood)
2. Attach (W) - Seat Pad to (H) - Seat Frame (note
：
Do not overtighten pad bolts,
overtightening will strip the t-nuts pressed into the wood)
3. Attach (R) - Foam Roller Bar and 2 (D16) - Foam Rollers to (G) - Leg Frame (note:
There are two possible holes to mount (R) Foam Roller Bar to (G) Leg Frame. For
taller people (6
'
-plus) mount in bottom hole, for shorter people (under 6
'
) mount in
top hole.)
4. Attach (G) - Leg Frame to (F) - Seat / Extension Frame
5. Attach (R) - Foam Roller Bar and 2 (D16) - Foam Rollers to (H) - Seat Frame
6. Slide (H) - Seat Frame into (F) - Seat / Extension Frame
Page 15
EXM-1500G ASSEMBLY INSTRUCTIONS
EXM1500G-112003
