ASSEMBLY- STEP 8
**Note
:
Do Not fully tighten pulley bolts and nuts involved in this step until after
completing this step
The following Parts and Hardware will be needed to complete Step 9
Parts Description
Qty Part Part
Description
1
V
Low Row Bar
1 A11
chain
1 A4
3/8
"
x2
½
"
hex head bolt
1 B2
3/8
"
nylon lock nut
2 C1
3/8
"
I.D. washer
2 D10
spring
snap
links
1
D22
Low row / leg extension cable 3050mm
2
D30
Round end cap
Step by Step
1. Begin routing (D22) - Low Row / Leg Extension Cable at (K) - Low Pulley Bracket,
route up through the bottom pulley in (L) - Welded Double Pulley Bracket, down
through back pulley mounted in (A) - Main Base Frame, under (A) - Main Base Frame,
back up through front pulley mounted in (A) - Main Base Frame and then up and over
pulley mounted in (F) - Seat / Extension Frame as shown
2. Attach (D22) - Low Row / Leg Extension Cable to (G) - Leg Frame as shown
Page 21
EXM-1500G ASSEMBLY INSTRUCTIONS
EXM1500G-112003