6
STEP
3
Attach the Pedals (L&R)(pt.24&37) to the Pedal post (L&R) (pt.6 & pt.38), using four sets of
flat washer
¢
10*
¢
25(pt.32)
,
knobs
(pt.1)
,
Bolt
(pt.25) and then assemble the right and left Pedal post (pt.38 & pt. 6) to the right and
left Crank Arm using.Spring washer (pt.26), Plastic ring (pt.2), Washer (pt.3), Spring washer (pt.15) and Fixing bolt
M8x20mm (pt.4). Finally, Fit the Plastic cover (pt.5). Repeat the above step for the left pedal.
Attach the Right Lower handrail (pt. 40) & Left Lower handrail (pt.41) to the Right Pedal post (pt.38) & Left Pedal post
(pt.6) by using Shaft (pt.7),and M8 Nylock Nut (pt. 8), finally assembly the Pedal Arm Plastic cover Left (Outsidel) (pt.
11) and Pedal Arm Plastic cover Left (Internal) (pt. 20), using Taping screw ST4.2x19 (pt. 9) and Taping screw
ST2.9x12 (pt.10), push the Cover Plug to the Arm Cover on both side
STEP
4
Slide the Upper Handrail L&R (pt.17&35) into the
Lower Handrail L&R (pt.41&40), then fix with four
Key head
Screw(
¢
8* 31)
(pt.12) and four Curved
Screw (M6*12)
(pt.33)
。