14
5.0 Heart rate detection priority
5.1. The monitor have three different detection sensors of heart rate: earpulse, chest pulse (with chest belt attached to
the chest skin), and handpulse. The detection priority is earpulse, chest pulse, and handpulse.
5.2. When you would like to detect chest pulse, please remove the ear clip cable from the monitor. And, wear on the
chest belt to start heart rate detection.
5.3. When you would like to detect handpulse, please make sure the ear clip cable is not installed, and do not wear the
chest belt.
6.0
Body Fat
6.1. In STOP mode, press the BODY FAT button to start body fat measurement.
6.2. The selected user (U1~U9) will blinking for 2 seconds. Then start measuring.
6.3. During measuring, user have to wear chest belt or hold both hands on the handgrip. And the LCD will display “--”
“--“ for 8 seconds until computer finish measuring.
6.4. LCD will display BODY FAT advice symbol, BODY FAT percentage, BMR, BMI for 30 seconds
<REFERENCE>
B.M.I. (Body mass index) integrated
B.M.I
SCALE
LOW LOW/MED
MEDIUM
MED/HIGH
RANGE <20 20-24
24.1-26.5
>26.5
BODY FAT:
SYMBOL —
＋
▲
◆
FAT%
SEX
LOW LOW/MED
MEDIUM
MED/HIGH
MALE <13%
13%-25.9% 26%-30%
>30%
FEMALE <23%
23%-35.9% 36%-40%
>40%
6.0 Function buttons
ST/STOP
To start or stop training.
RECOVERY
To act heart rate recovery function.
ENTER
To enter functions or data input.
DOWN
To make backward adjustment to each function data or decrease training resistance or select
personal data setting.
UP
To make upward adjustment to each function data increase training resistance or select personal data
or
setting.
RESET
1. To reset each function of Time, Distance, Pulse function figures.
2. To reset program setting and back to initial selection mode with Manual, Program,
user, or Target Heart Rate all blinking display.
Body Fat To press this button to start Body Fat detection.
7.0 Functions
TIME
Count Up - The computer starts counting up from 00:00 up to 99:59 during training.
Count Down - The computer will count down from the preset Time to
00:00
