![background image](http://html.mh-extra.com/html/body-sculpture/be-6910g-hb/be-6910g-hb_manual_2782863008.webp)
5
ASSEMBLY
INSTRUCTIONS
ASSEMBLY INSTRUCTIONS
Before beginning remove all contents form the carton and check that all parts are present. Note this may
require more than one person.
STEP
1
Attach the Front stabilizer (pt.23) to the Main frame (pt.29) using two
M10
Domed nuts (pt.14),
Ø10
Curved washers (pt.13) and two
M10
x75mm Carriage Bolts (pt.22). Then attch the Rear
stabilizer (pt.28) to the Main frame (pt.29) using two
M10
Domed nuts (pt.14),
Ø10
Curved
washers (pt.13) and two
M10
x90mm Carriage Bolts (pt.27).
STEP
2
Take the Front post (pt.19) and connect the
Upper cable wire (pt.31) and the Lower
cable wire (pt.30).(shown in Fig.1). Then
slide the Front post (pt.19) into the front
post housing with 6 sets of Allen key bolts
M8x20mm (pt.21), Spring washer (pt.15),
and Ø8 Curved washers
(pt.45).