Hardware Required
Assembly Step 3
A.) U Shape Frame Assembly
NOTE: Please make sure the
U Shape Frame (#52)
is above the
Front Support Tube (#02)
before assembling. Refer to the
diagrams below for more descriptive details.
With the help of an assistant, slide the
Coupling Rod (#09)
in
between the
U Shape Frame (#52)
. Align and attach the
U Shape
Frame (#52)
to the
Seat Cushion Frame (#08)
as illustrated in the
diagram below. Insert four
Hex Bolts (#54)
through four
Washers
(#46)
followed by two
Reinforcement Plates (#45)
and the
Seat
Cushion Frame (#08)
. Secure them together using four
Washers
(#46)
and four
Nylon Nuts (#48).
B.) Coupling Rod Assembly
Align and attach the back of the
Coupling Rod (#09)
to the
Seat
Cushion Frame (#08)
as illustrated in the diagram. Insert a
Hex
Bolt (#61)
through a
Washer (#71)
followed by the back of the
Coupling Rod (#09)
and
Seat Cushion Frame (#08)
. Secure them
together using a
Washer (#71)
and
Nylon Nut (#66)
.
C.) Coupling Rod Assembly
Align and attach the
Base of Height Adjustment Tube (#10)
to the
front of the
Coupling Rod (#09)
as illustrated in the diagram. Insert
a
Hex
Bolt (#62)
through a
Washer (#46)
followed by the front of the
Coupling Rod (#09)
and
Base of Height Adjustment Tube (#10)
.
Secure them together using a
Washer (#46)
and
Nylon Nut (#48)
.
Bolt
#54. Hex Bolt (M8x40 mm)
[4 Pieces]
#61. Hex Bolt (M10x60 mm)
[1 Piece]
#62. Hex Bolt (M8x50 mm)
[1 Piece]
Washer
#46. Washer (M8)
[10 Pieces]
#71. Washer (M10 1.0t)
[2 Pieces]
Nut
#48. Nylon Nut (M8)
[5 Pieces]
#66. Nylon Nut (M10)
[1 Piece]
Note:
Please make sure the
U Shape Frame (#52)
above the
Front Support Tube (#02)
before
assembling Step 3-A.
A
C
B
Assembly Instructions
IT9910
Page
7
