Assembly Instructions
Page 9
BRT 3980/3880
NUTS
WASHERS
BOLTS
#23. Hex Bolt (M8x105 mm) [4 Pieces]
#27. Hex Bolt (M8x40 mm) [6 Pieces]
#40. Washer (M8) [14 Pieces]
#37. Nylon Nut (M8) [10 Pieces]
PEDAL ASSEMBLY
Attach the
Left/Right Pedals (#54/#55)
onto the
Left/Right Pedal Tubes (#03
$
/#04
$
)
as shown in the
drawing below using a total of three
+H[%R
lts (#27)
,
three
Washers (#40)
, and three
Nylon Nuts (#37)
.
FOOT PEDAL ASSEMBLY
On the left side, attach the
Left Foot Pedal (#56)
to
the front of
Left Pedal Tube (#03
$
)
using two
Hex
Bolts (#23)
through two
Washers (#40)
and secure
with two
Washers (#40)
and two
Nylon Nuts (#37)
.
Repeat this process on the other side.
Note:
Care should be used when mounting or dismounting
the equipment. Before mounting or dismounting,
move the pedal on the mounting or dismounting
side to it lowest position and bring the machine to
a complete stop.
This unit is not equipped with a free-wheel. Pedal
speed should be reduced in a controlled manner.
A s s e m b l y S t e p 4
Hardware Required
