A s s e m b l y S t e p 5
Hardware Required
BOLTS
#29. Bolt (M8x30 mm)
[2 Pieces]
#47. Knob (M8)
[2 Pieces]
Others
HANDLE BAR ASSEMBLY
Please remove the two
Bolts (#29)
pre-assembled on
Center Post (#02)
and the two
Knobs (#47)
pre
-assembled on the
Left/Right Coupler Bars (#05/#06)
.
On the left side, insert
Left Handle Bar (#11)
into the
opening at the tip of
Left Coupler Bar (#05)
. Align the
holes of the
Left Handle Bar (#11)
and
Left Coupler
Bar (#05)
and secure by using one
Knob (#47)
through.
Repeat this process on the other side using
Right
Handle Bar (#12)
and
Right Coupler Bar (#06)
.
PULSE HANDLE BAR ASSEMBLY
Install the
Pulse Handle Bar (#13)
onto the front side
of the
Center Post (#02)
as shown in the illustration
below using two
Bolts (#29)
. Please ensure the wire of
the
Handle Pulse (#50)
is free and clear, avoiding
pinching it during this assembly step.You will need to
connectthis wire to the
Computer (#49)
later.
Assembly Instructions
Page 10
BRT 3980/3880
