A s s e m b l y S t e p 2
Hardware Required
WASHERS
BOLTS
#31. Screw (M8x15 mm)
[6 Pieces]
#39. Arc Washer (M8)
[6 Pieces]
#41 Spring Washer (M8)
[6 Pieces]
WIRE CONNECTIONS
Connect the
Main Sensor Wire (Lower)(#52)
to the
Main Sensor Wire (Upper) (#51).
CENTER POST ASSEMBLY
Remove the
6FUHZ
V
(#31), Spring Washers (#41)
,and
Arc Washers (#39)
that are pre-assembled on the
Main Frame (#01)
and set them aside nearby as they
will be used later in this step.
Being careful not to pinch any wires, slide the
Center
Post (#02)
onto the
Main Frame(#01)
and secure it
using the previously removed six
6FUHZ
V
(#31),
six
Spring Washers (#41)
, and six
Arc Washers (#39)
as shown in drawing below.
Assembly Instructions
Page 7
BRT 3980/3880
