VKR1
7
00
/1010
Power Tower
Assembly Instructions
Page 1
2
A. Insert two
Screws (#21)
and two
Washers (#36)
through the
bottom of the
Right Dip Arm (#105R)
as illustrated and secure
the
Arm Pad (#14)
to the
Right
Dip Arm (#105R)
. DO NOT
OVER-TIGHTEN, AS THIS MAY STRIP THE THREAD OR
CRACK THE WOOD
ARM PAD (#14)
.
B. Repeat this process on the opposite side.
Now tighten all the
Bolts.
IN THE
The assembly process is complete. However, for your own
safety, please make sure to read this entire manual which
includes safety instructions and warnings as well as any
safety/warning labels located on the product before use.
A s s e m b l y S t e p
8
Hardware Required
BOLT
Washer
#21 Screw (M6x65 mm)
[4 pieces]
#36 Curved Washer (M6)
[4 pieces]
