VKR1
7
00
/1010
Power Tower
Assembly Instructions
Insert the
Support Crossbar (#133)
in the hole located on the
inside of
Left Stabilizer (#1101L)
and secure with one
Washer
(#38)
and one
Hex Bolt (#20)
.
Attach the
Bottom Crossbar (#107)
to the
Left Upright Base
(#1102)
by inserting two
Hex Bolts (#41)
through the
Bottom
Crossbar (#107)
and then into the
Upright Base (#1102)
.
Then secure it with two
Washers (#37)
and two
Nylon Nuts
(#25).
Repeat this process on the opposite side using the
Right Stabilizer
(#1101R)
.
BOLT
Washer
#41 Hex Bolt (M8x70 mm)
[4 pieces]
#20 Hex Bolt (M8x25 mm)
[2 pieces]
#25 Nylon Nut (M8)
[4 pieces]
Nut
#37 Large Curved Washer (M8)
[4 pieces]
#38 Curved Washer (M8)
[2 pieces]
A s s e m b l y S t e p 2
Hardware Required
(Please note: The exploded diagram below shows right side correctly assembled
for reference.
Page
6
