PT620 / VKR1808
Page 9
Assembly STEP 5
Secure the Back Pad
(#11)
to the Back Pad Support Frame
(#07)
using two Bolts (#30) and two Washers
(#14)
.
DO NOT OVER TIGHTEN THE BOLTS (#30) AS THIS MAY STRIP THE
THREAD OR CRACK THE WOOD IN THE BACK PAD (#11).
Secure the Arm Pad
(#12)
to the Arm Rest Support Frame
-Right
(#34)
using two Bolts
(#19)
and two Curved Washers
(#20) Repeat this process on the other side.
DO NOT OVER-TIGHTEN THE BOLTS (#19) AS THIS MAY STRIP THE
THREAD OR CRACK THE WOOD IN THE ARM PAD (#12).
Hardware Required
THE ASSEMBLY PROCESS IS NOW COMPLETE.
However, for your own safety, please make sure to read this entire Owner’s Manual which includes
safety instructions and warnings, as well as any safety/warning labels affixed to the product before use.
For your safety , please visually and functionally inspect and test the unit after assembly is complete.
#19. Bolt (M8x70 mm) [4 pieces]
#14. Washer (M8)
[2 pieces]
#20. Curved Washer (M8)
[4 pieces]
#30. Bolt (M8x20 mm) [2 pieces]
