PT620 / VKR1808
Page 7
Assembly STEP 3
Align and attach the L Shaped Upper Frame
(#06)
to the
Back Pad Support Frame
(#07)
as illustrated in the diagram.
Insert two Bolts
(#19)
through two Curved Washers
(#20)
followed by the L Shaped Upper Frame
(#06)
and Back
Pad Support Frame
(#07)
. Secure them together using two
Curved Washers
(#20)
and two Lock Nuts
(#15)
. Repeat this
process on the other side.
Insert the Pull Up Handlebar
(#10)
into both L Shaped Upper
Frame
(#06)
and secure it using two Screws
(#28)
directly
into the L Shaped Upper Frame
(#06)
as illustrated. Slide
the Upper Frame End Cap
(#31)
over the Pull Up Handlebar
(#10)
and both the L Shaped Upper Frames
(#06)
.
Hardware Required
#19. Bolt (M8x70 mm) [4 pieces]
#28. Screw (M8x35 mm) [2 pieces]
#20. Curved Washer (M8)
[8 pieces]
#15. Lock Nut (M8)
[4 pieces]
