BRB835/852/880
Page 6
Using the illustration below for reference, align the four holes of the Rear Handle Bar
(#14)
to the holes on the
Cushion Frame
(#13
) and attach using the two Carriage Bolts
(#16)
and secure using two Washers
(#35)
and
two Cap Nuts
(#34)
.
With the help of an assistant, connect the Hand Pulse Wire
(#18a)
to the Hand Pulse Wire 1
(#22)
as shown
in the exploded diagram A.
Step 3
REAR HANDLE BAR ASSEMBLY
Hardware Required
Assembly Instructions
#34
Cap Nut (M8)
[2 pieces]
#35
Washer (M8)
[2 pieces]
#16
Carriage Bolt (M8x42mm)
[2 pieces]
After complete assembly: If the computer is not picking up your hand pulse
signal (or you are getting inaccurate readings), please refer to our
“Troubleshooting” section on Page 13 for other troubleshoot issues.
NOTE :
HAND PULSE SIGNAL
16
35
34
13
14
22
18a
22
18a
18
