Body Champ BRB5688, Owner'S Manual

Page: 10 / 24

BRB5688 Page 8
Assembly STEP 2
A.)
Please remove the two Lock knobs
(#42)
and two Washers
(#24)
that are pre-assembled on the Adjustable Bar (#03) . Set them aside
nearby as they will be used later in this step. With the help of an
assistant, slide the Adjustable Bar (#03) onto the trough of the Bottom
Frame (#02) as shown below. Secure using two Lock Knobs (#42)
and two Washers
(#24)
.Please note: The Adjustable Bar
(#03)
has
labels indicating “REAR” and “FRONT” to ensure correct assembly.
Please ensure the end with “REAR” is facing the back of the unit.
B.) Slide the Cushion Frame (#07) onto the trough of the Adjustable
Bar
(#03)
the secure it using one Bolt
(#18)
.
C.) Align the two holes of the Right Rear Handle Bar (#05) and Left
Rear Handle Bar (#06) to the corresponding holes on the Cushion
Frame (#07) and secure them together using two Hex Bolts (#16) ,
four Washers
(#23)
and two Nylon Nuts
(#27)
.
Hardware Required
A
B
C
#42 Lock Knob (M10)
[2 pieces pre-assembled]
#24 Washer (M10)
[2 pieces pre-assembled]
#16 Hex Bolt (M8x80mm)
[2 pieces]
#23 Washer (M8)
[4 pieces]
#27 Nylon Nut (M8)
[2 pieces]
#18 Bolt (M8x35mm)
[1 piece]