CUSTOMER SERVICE 1-888-707-1880 7 MAURICE PINCOFFS CANADA INC
©
2008
TREADMILL OPERATION
Your treadmill features a walking belt coated with a lubricant. IMPORTANT: Never apply silicone spray
or other substances to the walking belt or walking board. Such substances will deteriorate the walking belt
and cause excessive wear.
How to plug in the power cord.
GROUNDING INSTRUCTIONS.
This product must be grounded. No plug adapter should be
used with this product.
WARNING:
Improper connection of the equipment
grounding conductor can result in a risk of an electric shock.
Check with a qualified electrician if you are in doubt as to
whether the product is properly grounded. Do not modify
the plug provided with the product, if it will not fit the
outlet; have a proper outlet installed by a qualified
electrician. The use of an extension cord with this product is
not recommended. If an extension cord is needed, use a
short (less than 10 feet) heavy gauge (14 gauge or better)
extension cord with a three prong (grounded) plug and
receptacle. IMPORTANT: If the power cord is damaged, it
must be replaced with a manufacturer recommended power
cord.
1.
Plug the indicated end of the power cord into the
socket of the treadmill. See drawing below
2.
Plug the power cord into an appropriate outlet
that is properly installed and grounded. See
drawing below. Important: The treadmill is not
compatible with GFCI-equipped outlets.
Note: Your power cord and outlet may appear different
