CUSTOMER SERVICE 1-888-707-1880 21 MAURICE PINCOFFS CANADA INC
©
2008
CLEANING AND MAINTENANCE
Care has been taken to assure that your treadmill has been properly adjusted and lubricated at the factory.
It is not recommended that the user attempt service on the internal components instead seek service from
an authorized service center. However, from time-to-time the outer surfaces may appear dull or dirty,
following the instructions listed below will restore and preserve the original finish.
Note: Always unplug your treadmill prior to cleaning in order to avoid electrical hazard or shock.
1. Cleaning metal surfaces may be accomplished by using a soft cotton or terry cloth rag with a light
application of car wax. Do not use aerosol sprays or pump bottles as they may deposit wax upon the
walking or computer surface.
2. Under no circumstances are you to use ammonia, oils, silicones, or any other compounds on the
rubberized walking surface. The use of such materials may cause serious injury to the body and/or
deteriorate the performance of the walking surface. Only clean the rubberized walking surface with a
damp cloth (water only).
3. From time-to-time the computer surface may collect dust or finger prints. The use of harsh chemicals
will destroy the protective coating and cause a static build up that will damage the components. This
surface may be cleaned with specially prepared chemicals found in most computer supply stores
especially made for anti-static surfaces. It is strongly recommended that you purchase such a cleaning
compound.
