ASSEMBL
Y
BODY
BIKE
®
I N DOOR C YC L E
PEDALS
1: Place the right pedal arm
with the socket pointing
upwards, see fi gure 11.
2: Add resistance on the brake,
so the pedal arm is unable to
rotate, see fi gure 12.
3: After tightening by hand,
use a 15mm pedal wrench to
tighten the pedal completely
(45Nm).
Figure 12
Figure 13
Figure 11
Please note
- the pedals are marked
with R for Right and L for
Left side.
- the pedals should always
be screwed on in the
direction of the handlebar,
see fi gure 13.
- make sure that the hole
in the pedal arm is greased
when mounting the pedal.
- start mounting the
pedal by hand as tools
will tighten the pedal at a
wrong angle.
BOTTLE HOLDER
1: Mount the bottle holder at the
top of the handlebar, see fi gure 9.
Add one or two rubber rings if the
bottle holder is not fi rmly fi xed.
SADDLE
1: Place the saddle in the track on
the seat post.
2: Secure the saddle with the
remaining adjustment handle, see
fi gure 10. To fasten the saddle to
the adaptor and adjust the tilt of
the saddle, use a 14mm wrench
on the bolt marked with an A on
fi gure 10.
9
ASSEMBL
Y
BODY
BIKE
®
I N DOOR C YC L E
9
