The navigation line at the bottom
of the screen will show you what
screen you are on and if you are
in scan mode. In scan mode the
console automatically changes
between the fi rst two screens. The
console is in scan mode when the
line underneath the word ‘scan’ is
on and the line above ‘scan 1 2’ is
on. A line will also appear under the
screen number which is currently
shown, see fi gure 41.
End scan mode:
Press
or
and the console will
end scan mode.
takes you to
screen 1 and
takes you to screen
5, see fi gure 42.
Enter scan mode:
Keep pressing
or
until the line
under ‘scan’ turns on, see fi gure 42.
Navigate between screens:
Use
or
, see fi gure 42.
Screen 1
[RPM, %MAX HR, %MAX WATT]
The screen shows the values
relative to your maximum values.
This is the data you will most likely
use during training.
Screen 2
[RPM, HR, WATT]
This screen holds the absolute
values.
2
3
4
5
1
SCAN
2
3
4
5
1
SCAN
RPM
%
MAX
HR
%
MAX
WATT
2
3
4
5
1
SCAN
RPM
HR
WATT
Figure 42
SCAN
MODE
Figure 41
The console is in scan mode
On screen 1
NAVIGATION, SCAN AND THE FIVE SCREENS
