Figure 10
WASHER
A
Figure 3
WASHER
Figure 9
HANDLEBAR
1: Place the handlebar on top of
the front post.
2: Screw an adjustment handle
(size 32mm) clockwise into
the socket from underneath
the post, see fi gure 3. Fix the
handlebar completely to the
front post by tightening the
adjustment screw on the right
side of the handlebar.
CONSOLE
Figure 4
RUBBER PAD
REMOVE
Add rubber rings if needed
Figure 5
Figure 6
Figure 7
Figure 8
Please note:
The console is set for km and kg
as default. If preferred change
to miles and lb before mounting
the console, see page 18.
1: Remove the small plastic strip on
the back of the console, see fi gure
4. Make sure batteries are correctly
inserted.
2: Mount the console on the
handlebar mount by using the 3
screws, see fi gure 5. Rubber pad
should face matt side outwards.
3: Press the handlebar mount onto
the handlebar, see fi gure 6.
4: Adjust the angle to your preferred
view of the console, see fi gure 7.
5: Tighten the two screws on the
mount, see fi gure 8.
