32
- Remove the cardboard wedge between the movement and the dial,
- Tighten the stud bolts in the anchors (three stud bolts are supplied with the clock in a separate
package),
- Anticipate adjustment of the nuts and washers, remembering to leave sufficient space (at least
25mm) between the wall and the back of the clock to fit the cables and cable glands,
M8 x 80 stud bolt
25 mm
- Pass all the cables through cable glands before installing the clock on the stud bolts,
- Fasten the clock using the stud bolts with the washers and nuts.
Cable glands
Wall
25 mm
Stud
Cable gland
Cable(s)
EN