Voyager 64
24
Using Vrefresh without a Mouse
You will need to use command-line
parameters with the following options:
VREFRESH X Y
where
X = 640, 800, 1024, 1280 and
Y = 0 (56Hz),
1(60Hz),
2 (70Hz),
3 (72Hz),
4 (75Hz),
5 (interlaced).
Note that 1600 x 1200 and 1152 x 864 each
have a single refresh rate so this utility is not
needed.
Using the FCON Utility
This DOS-based utility allows you to enable or
disable the board’s feature connector. In order
to maintain VESA compatibility when using the
feature connector, only 1MB video modes are
supported.
Instructions for FCON are provided on-screen.