48
H
OME
/O
FFICE
M
ODEM
S-Registers
This section defines the purpose of the modem registers, and
sequentially lists the registers and describes their functions.
These registers affect various operating characteristics and
allow you to obtain information about the modem, as well as
test the modem. Each register has a factory-set value, which
you can read or change to fit your needs.
Reading a Register Value
To read the current value of a register, type:
AT Sn? [ENTER],
where n is a register number.
AT Sn? Sn? [ENTER] from the command mode.
To read the register values of S0 and S1, type
AT S0? S1? [ENTER].
The modem will display the first register value, a carriage
return, the next register value, a carriage return, and OK or 0.
Changing a Register Value
To change a register value, use the Sn command (ATSn=v),
where n is a register number and v is the new value you want
to assign to the register. Type:
AT S0=3 [ENTER]
to have the modem automatically answer on the third ring.
HOMEOFF.PM6
5/9/97, 9:15 AM
48
Summary of Contents for HOME OFFICE
Page 1: ...1 HOME OFFICE MODEM 33 6 Internal External Fax Modem Advanced User s Guide...
Page 2: ...2 HOME OFFICE MODEM...
Page 69: ...69...
Page 70: ...Manual Part No 9378 Rev 1 0...
